Model 00: Model & Support Refill System for Stratasys® Classic Printers USB

  • Sale
  • Regular price $99.99



Javelin USB Programmer 

Model & Support Programmer for Stratasys® Classic EEPROMS



Model & Support Material Refill System for Stratasys® Classic Printers USB Version Let's you refill or change the material type and amounts on any Stratasys classic EEPROM/Chip.

  • Windows PC Required
  • Reads Classic Chips
  • Writes Classic Chips
  • Automatic Serial Number Generation
  • Automatic Date Generation
  • Automatic Printer Type Detection
  • Standard size options in one click 56,92,184
  • Refill with a single click 
  • Slow Read/Write
  • Manual Programming
  • Cannot change EEPROM type
  • Allows for programming custom roll and fill sizes.

Compatible With Machines

All Classic Machines.  This is not compatible with the F Series F123,F370,etc.  Not compatible with the Fortus 450 or 380. Not compatible with Plus machines.

This Javelin Manufacturing EEPROM Programmer is compatible with

 

Fortus®

Machines from the Fortus® family, including Fortus 360mc, Fortus 400mc, and Fortus 900mc®.

Dimension

All machines from the Dimension® family, including Dimension BST 768, Dimension SST 768, Dimension Elite, Dimension BST 1200, Dimension SST 1200, and Dimension 1200es. Additionally, the package is compatible with the Fortus® 250mc and Fortus 200mc models.

Older T-Class machines which you should unlock to 400mc's for free.

A wide range of older Stratasys® machines, including the Titan® and Vantage® family (Fox Type), such as Vantage I ABS, Vantage I PC, Vantage Xa, Vantage Xp, Vantage S, Vantage SE, Titan®, Titan HW™, and Titan TI™.  It is also likely to work with Maxum™, Quantum™, and other older FDM machines, although these have not been tested extensively due to their rarity.  

Compatible With Materials


MODEL

ABS "Older Dimension ABS"
ABSI "Transparent ABS"
PC "PolyCarbonate"
ULT9085 "ULTEM 9085 resin"
PPSF "PPSF/PPSU Polyphenylsulfone"
P401 "P400 ABS"
P430 "ABSPlus P430"
ABS-M30I "Transparent ABS M30"
ABS-ESD7 "ESD Safe ABS"
NYL12 "FDM Nylon 12"
PC-ABS "PolyCarbonate ABS Blend"
ABS-M30 "ABS M30"
PC-ISO "Biocompatible Polycarbonate"
ASA "ASA UV resistant"
ULT1010 "ULTEM 1010 resin"
NYL12CF "Carbon Fiber Nylon 12"
NYL6 "FDM Nylon 6"
ST130 "ST130 Sacrificial Tooling"
Ant800NA "Antero PEKK Polymer"
Ant840 "Antero ESD PEKK" 

Support
ABS_S "ABS Breakaway Support"
ABS_SS "ABS Soluble Support"
P400SR "P400SR Soluble Support"
SR20 "ABS-ESD7, ASA, All ABS"
SR30 "ABS-ESD7, ASA, ABS-M30(i), ABSplus"
SR35 "ABS-ESD7, ASA, ABS-M30, ABS-M30i"
SR-100 "Polycarbonate Soluble"
SR-110 "PC-ABS, Nylon 6/12/12CF"
PC_S "PC Breakaway Support"
PPSF_S "PPSF Breakaway Support"
ST130_S "ST130 Break Away"
U1010S1 "Ultem 1010 Break Away"
ULT_S "Ultem 9085 Break Away"
SUP8000B "Antero Support"

Important Notes

    • No EEPROMs (Chips) are included.
    • Javelin is in no way affiliated with Stratasys® or its affiliates.
    • No printer manufacturer can void your warranty due to the use of third-party materials! It's covered under The Magnuson-Moss Warranty Act, a U.S. federal law similar laws exist internationally to protect your investment.

The use of this product may potentially conflict with service agreements, local laws, regulations, or moral codes.